Cleaning method of reactor bearings

**Reactor Bearing Inspection and Cleaning Procedure**

1. **Initial Inspection**

- Record the bearing's appearance and check the remaining lubricant.

- Sample the lubricant for inspection.

2. **Cleaning Process**

- **Cleaning Agents:** Use gasoline or kerosene for cleaning.

- **Two-Stage Cleaning:**

- **Coarse Cleaning:**

- Place the bearing in a container with a metal mesh pad to avoid contact with dirt.

- Use a brush to remove grease and adhesive while ensuring the bearing does not rotate to prevent damage to the rolling surface.

- **Fine Cleaning:**

- Rotate the bearing in the cleaning oil for thorough cleaning.

3. **Post-Cleaning**

- Ensure the bearing is correctly installed after cleaning.

By following these steps, the reactor bearings can be effectively inspected, cleaned, and maintained for optimal performance.